OPERATION
Adjusting the Airflow Rate
You can adjust the airflow rate to increase your comfort.
To adjust the airflow rate setting
1. Press
.
•
Each pressing of
change the airflow rate setting in sequence
shown below.
Auto
Indoor unit quiet
Low
High
• When the airflow is set to “
”, indoor unit quiet operation will start
and the noise from the unit will become quieter.
• In indoor unit quiet operation, the airflow rate is set to a weak level.
•
If the temperature dose not reach the desired point, change the
airflow rate setting.
• If COOL/DRY operation is started with airflow settings on “AUTO”,
the indoor unit will initially deodorise, which functions to suppress
any internal odours. As a result, the indoor unit will not emit air
immediately. (Wait for about 1 minute.)
• At smaller airflow rates, the cooling (heating) effect is also smaller.
Tips for saving energy
• Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
- Recommended temperature setting for cooling: 26.0-28.0°C, for heating: 20.0-24.0°C.
•
Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
• Clogged air filters cause inefficient operation and waste energy.
Clean them once in about every 2 weeks.
11
English
Summary of Contents for FTHF50VVMV
