16 Maintenance and service
Installer and user reference guide
26
FFA25~60A2VEB(9)
Split system air conditioners
4P550955-4 – 2018.08
CAUTION
Do NOT insert fingers, rods or other objects into the air
inlet or outlet. Do NOT remove the fan guard. When the
fan is rotating at high speed, it will cause injury.
CAUTION: Pay attention to the fan!
It is dangerous to inspect the unit while the fan is running.
Be sure to turn off the main switch before executing any
maintenance task.
CAUTION
After a long use, check the unit stand and fitting for
damage. If damaged, the unit may fall and result in injury.
NOTICE
Do not wipe the controller operation panel with benzine,
thinner, chemical dust cloth, etc. The panel may get
discoloured or the coating peeled off. If it is heavily dirty,
soak a cloth in water-diluted neutral detergent, squeeze it
well and wipe the panel clean. Wipe it with another dry
cloth.
CAUTION
Before accessing terminal devices, make sure to interrupt
all power supply.
NOTICE
When cleaning the heat exchanger, make sure to remove
the switch box, fan motor, drain pump and float switch.
Water or detergent might deteriorate the insulation of
electronic components and result in burnout of these
components.
16.1
Cleaning the air filter, suction
grille, air outlet and outside panels
16.1.1
To clean the air filter
When to clean the air filter
:
▪ Rule of thumb: Clean every 6 months. If the air in the room is
extremely contaminated, increase the cleaning frequency.
▪ Depending on the settings, the user interface can display the
TIME TO CLEAN AIR FILTER
notification. Clean the air filter
when the notification is displayed.
▪ If the dirt becomes impossible to clean, change the air filter
(= optional equipment).
How to clean the air filter
:
NOTICE
Do NOT use water of 50°C or higher.
Possible
consequence:
Discoloration and deformation.
1
Open the suction grille.
BYFQ60B
BYFQ60C
1
2
Remove the air filter.
BYFQ60B
BYFQ60C
1
3
3
2
3
3
1
2
3
Clean the air filter. Use a vacuum cleaner or wash with water. If
the air filter is very dirty, use a soft brush and neutral detergent.
4
Dry the air filter in the shadow.
5
Reattach the air filter and close the suction grille (steps 2 and 1
in reverse order).
6
Turn ON the power.
7
Press the
FILTER SIGN RESET
button.
Result:
The
TIME TO CLEAN AIR FILTER
notification
disappears from the user interface.
16.1.2
To clean the suction grille
NOTICE
Do NOT use water of 50°C or higher.
Possible
consequence:
Discoloration and deformation.
1
Open the suction grille.
BYFQ60B
BYFQ60C
1
2
Remove the suction grille.
BYFQ60B
45°
1
Summary of Contents for FFA50A2VEB9
Page 31: ......
