12
2. Remove the air filters.
Pull the air filter clips downward at an angle to
detach the filter.
3. Clean the air filter.
Use vacuum cleaner
A)
or wash the air filter with
water
B).
A)
Using a vacuum cleaner
(Do not use air of 120°F or
higher)
B)
Washing with water
When the air filter is very dirty,
use soft brush and neutral
detergent.
(Do not use water of 120°F or
higher)
Remove water and dry in the shade.
NOTE
NOTE
NOTE
•
Do not wash the air conditioner with hot water of
more than 120°F, as doing so may result in discol-
oration and/or deformation.
•
Do not expose it to fire, as doing so may result in
burning.
4. Fix the air filter.
(1)
Hook the air filter on the projections at the top
of the suction grille.
(2)
Press the bottom of the air filter against the
projections on the bottom of the grille to snap
the air filter into place.
5. Shut the suction grille.
Refer to item No.
1
.
6. Press the FILTER SIGN RESET BUTTON on
the remote controller.
The display “
” (TIME TO CLEAN AIR
FILTER) vanishes.
NOTE
NOTE
NOTE
•
Do not remove the air filter except when cleaning.
Unnecessary handling may damage the filter.
HOW TO CLEAN AIR OUTLET AND OUT-
SIDE PANELS
•
Clean with soft cloth
•
When it is difficult to remove stains, use water or
neutral detergent.
•
When the flap is extremely contaminated, remove
it as below and clean or exchange it.
(Contact your dealer when you exchange flap.)
WARNING
•
Do not let the indoor unit get wet as it may cause
an electric shock or fire.
NOTE
NOTE
NOTE
•
Do not use gasoline, benzene, thinner, polishing
powder, liquid insecticide. It may cause discolor-
ing or warping.
•
Do not scrub firmly when washing the blade with
water.
The surface sealing may peel off.
•
Do not use water or air of 120
°
F or higher for
cleaning air filters and outside panels.
01_EN_3PN05140-8W.fm Page 12 Wednesday, September 14, 2005 2:06 PM
