Daikin FCQ100KVLT, Removal Manual

Page: 5 / 17

Si281312E Procedure to Remove Decoration Panel
Removal Procedure 3
2. Procedure to Remove Decoration Panel
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step Procedure Points
„
Removing the suction
grille according to
procedure for removing
the suction grille.
„
Relay connector
„
Corner cover string
„
Screw fixing the decoration
panel
„
According to the
procedure for the removal
of PCB, remove the lid
from the switch box and
disconnect the relay
connector for the swing
motor.
1. Removing the decoration
panel
1
Pull down the corner
covers on the inner side
(i.e., the suction grille
side) to remove them.
2 Remove the corner
cover strings.
3 Unfasten the 4 screws
that fix the decoration
panel to the extent that
the panel is loosely
fixed.
4
Unlatch the 4 outer
latches (A).
(At this time, make sure
the 2 inner latches (B)
are latched.)
5 While holding the
decoration panel with
both hands, unlatch the
2 inner latches (B), and
then remove the
decoration panel.
Corner cover
Corner cover
Mounting screws
Mounting
screws
Hook
Outer latch (A)
(located in 4 places)
Hook
Inner latch (B)
(located in 2 places)
Relay connector
String
Corner cover
Latch
Mounting screws
Hook