Procedure to Remove Heat Exchanger
Si281302
6
Removal Procedure
5. Procedure to Remove Heat Exchanger
Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
Removing the front grille in
accordance with "Removal
of Front Grille".
Removing the switch box
in accordance with
"Removal of Switch Box".
Caution
If gas leaks, repair the leakage
section, collect refrigerant
inside the unit completely, then,
recharge refrigerant after
performing vacuum
dehydration.
Caution
Don't mix air or the like other
than the specified refrigerant
into a refrigeration circle.
(Mixing of air or other gas
causes abnormal high pressure
in the refrigerating cycle and
results in pipe rupture or
personal injuries.)
Pay attention not to soil the
floor with residual drain.
In case that the drain hose is
buried inside wall, remove
the heat exchanger after
pulling out the drain hose.
Caution
When removing or reinstalling
the heat exchanger, be sure to
wear gloves or wrap the heat
exchanger with cloth or the like.
(Otherwise, the fins may injure
your hand.)
1
Press strongly the
claws on both left and
right sides of heat
exchanger toward
inside.
2
To remove the heat
exchanger, pull it
upward.