background image

9

B. LEFT AND RIGHT DIRECTION

Hold the tabs on edge louvers (horizontal airflow
direction adjustment blades) down slightly and
adjust left and right to match the room conditions
or your preference.

Stop the horizontal blades at a position where you
can hold the tabs and adjust it left and right.

NOTE

Only make adjustments after you have stopped
the airflow direction swing in a position where
adjustments are possible. Your hand may get
caught if you attempt to make adjustments while
the unit is swinging.

Observe the following precautions to ensure the air 
conditioner operates.

Prevent direct sunlight from the window by using 
curtains or blinds during the COOLING 
OPERATION.

Keep doors and windows closed. If the doors and 
windows remain open, room air will flow out and 
decrease the effect of cooling and heating.

Never place objects near the air inlet and the air 
outlet of the air conditioner. It may decrease the 
effect or stop the operation.

Adjust the room temperature properly for a 
comfortable environment. Avoid excessive 
heating or cooling.
Not doing so wastes electricity.

When the display shows “

” or “Time to clean 

filter”, ask a qualified service person to clean the 
filters.
(Refer to “

8. MAINTENANCE

” on page 9.)

Operating the indoor unit with stained air filter 
may decrease capacity or cause malfunction.

Install TVs, radios, and stereos 1 m or more away 
from the indoor unit and remote controller.
Images may become fuzzy and noise may be 
generated.

7. OPTIMUM OPERATION

Turn off the power circuit breaker when it is not 
in use for a long period. When the power circuit 
breaker is turned on, small amount of power is 
consumed even if the air conditioner is not in 
operation. (*1)
Turn off the power circuit breaker for saving 
energy. When reoperating, turn on the power 
circuit breaker 6 hours before operation for 
smooth running.
(Refer to “

8. MAINTENANCE

” on page 9.) (*2)

*1 The consumed power while the outdoor unit is 

not in operation depends on the model.

*2 The setting before the power circuit breaker is 

cut off is stored. (The timer setting is cleared.)

Fully use the function of airflow direction adjust.
Cold air gathers on the floor, and warm air 
gathers under the ceiling.
Set the air direction to horizontal during the 
COOLING or PROGRAM DRY OPERATION, and 
set it downwards during the HEATING 
OPERATION.
Do not let the air blow directly to a person.

Use the TIMER OPERATION effectively.
It takes some time until the indoor temperature 
reaches the set temperature. It is advisable to 
start operation in advance using the TIMER 
OPERATION.

ONLY A QUALIFIED SERVICE PERSON IS 

ALLOWED TO PERFORM MAINTENANCE

WARNING

Do not use flammable gas (such as hair 

sprays and insecticides) near the air 

conditioner.

Do not wipe the air conditioner with benzine or 

thinner.

It may cause cracks, electric shocks or a fire.

Never put your fingers or rods in the air inlet, 

air outlet or air blade.

The fan is rotating at high speed, so you would 

get injured.

8. MAINTENANCE

(FOR SERVICE PERSONNEL)

Summary of Contents for FAA100BVMA





















Reviews: