8 Configuration
Installer reference guide
65
EWAQ+005BAVP
Packaged air-cooled water chillers and packaged air to water heat
pumps
4P492900-1 – 2017.06
8.5
Menu structure: Overview installer settings
[A]
[A.2]
[A.2.1]
[A.2.2]
[A.2.2.E]
[A.3]
[A.3.1]
[A.3.1.1]
[A.3.2]
[A.3.3]
[A.5]
[A.5.1]
[A.7]
[A.6]
[A.6.3]
[A.6.2]
Installer settings
Language
System layout
Space operation
Heat sources
System operation
Commissioning
Overview settings
System layout
Standard
Options
Capacities
Confirm layout
Space operation
LWT settings
Room thermostat
Operation range
Heat sources
Backup heater
System operation
Auto restart
Preferential kWh rate
Pwr consumpt. control
Averaging time
Ext amb. sensor offset
Forced defrost
Commissioning
Test run
UFH screed dryout
Air purge
Actuator test run
Standard
Unit type
Compressor type
Indoor software type
Unit control method
Pump operation mode
Power saving possible
User interface location
Options
External sensor
Control box
Option box
Leaving water
Main
Delta T source
Room thermostat
Room temp. range
Room temp. offset
Ext. room sensor offset
Operation range
Space heating OFF temp
Space cooling On temp
Backup heater
Operation mode
Enable BUH step 2
Equilibrium temp.
Prefer. kWh rate PS
Allowed heaters
Forced pump OFF
Pwr consmp ctrl
Mode
Type
Amp. value
Amp. limits for DI
kW value
kW limits for DI
Priority
Control box
Backup heater steps
BUH type
Preferential kWh rate
Main
LWT setpoint mode
Temperature range
Modulated LWT
Emitter type
Room temp. step
[A.3.1.3] Delta T source
Heating
Cooling
Glycol present
Contact type main
[A.2.2.F] Option box
Ext. backup heat src
Alarm output
External kWh meter
External kWh meter
External sensor
PCC by digital inputs
Emergency
INFORMATION
Depending on the selected installer settings, settings will
be visible/invisible.
