Daikin EUWL KZW1 Series, Service Manual

Page: 76 / 140

The Digital Controller: EUW5-24KZW1 and EUWL5-24KZW1 ESIE-0303
2–14 Part 2 – Functional Description
3
1
2
4
5
2.3 Start/Stop
At power ON When the power is ON, the display shows the inlet water temperature.
Start/stop ■ Press
c
for 5 s to start or stop in cooling mode.
■ Press
h
for 5 s to start or stop in heating mode.
Remote start/stop,
remote cool/heat The procedure to start or stop the unit depends on the setting of the remote start/stop. See "Start/Stop"
on page 2–14.
The procedure to cool or heat depends on the setting of the remote cool/heat. See "Settings: Direct
and User Parameters" on page 2–17.
Start/stop and
cool/heat selection
for
EUW(L)5-24KZW1 The table below contains information on how to select start or stop or how to select cooling or heating
mode.
Setting the
temperature Use the
u
and
d
keys to adjust the water temperature.
If start/stop
set-up is... and cool/heat
set-up is...
, then... to...
Local (
h7
=0) Local (
h6
=0)
Press
c
for 5 s
Start/stop in cooling mode.
Always stop the unit before
you switch to cooling because
start/stop and cool/heat are
combined in the same button.
Press
h
for 5 s
Start/stop in heating mode.
Always stop the unit before
you switch to cooling because
start/stop and cool/heat are
combined in the same button.
Remote (
h7
=1) Local (
h6
=0)
Press
c
for 5 s
Cool.
Press
h
for 5 s
Heat.
Switch remote start/stop Start/stop.
Remote (
h7
=1) Remote (
h6
=1) Switch remote start/stop Start/stop.
Switch remote cool/heat Cool/heat.
Local (
h7
=0) Remote (
h6
=1) Switch remote cool/heat Switch on the unit
automatically.
Only cool/heat selection is
possible.