Daikin ETSH16P30EF User Reference Manual Download

Page: 27 / 68

Operation

User reference guide

ETSH/X(B)16P30+50EF
Daikin Altherma 3 H HT ECH₂O
4P679470-1 – 2022.02

Depending on the system layout and installer configuration, you use a different
temperature control:

▪

Room thermostat control

▪

Leaving water temperature control

▪

External room thermostat control

5.6.2 Setting the space operation mode

About space operation modes

Your unit can be a heating or a heating/cooling model:

▪

If your unit is a heating model, it can heat up a space.

▪

If your unit is a heating/cooling model, it can both heat up and cool down a
space. You have to tell the system which operation mode to use.

To determine if a heating/cooling heat pump model is installed

Go to [4]:

Space heating/cooling

Check if [4.1]

Operation mode

is listed and editable. If so, a

heating/cooling heat pump model is installed.

To tell the system which space operation to use, you can:

You can…

Location

Check which space operation mode is currently used. Home screen

Set the space operation mode permanently.

Main menu

Restrict automatic changeover according to a monthly
schedule.

To check which space operation mode is currently used

The space operation mode is displayed on the home screen:

▪

When the unit is in heating mode, the icon is shown.

▪

When the unit is in cooling mode, the icon is shown.

The status indicator shows if the unit is currently in operation:

▪

When the unit is not in operation, the status indicator will show a blue pulsation
with an interval of approximately 5 seconds.

▪

While the unit is in operation, the status indicator will light up blue constantly.

To set the space operation mode

Go to [4.1]:

Space heating/cooling

Operation mode

Select one of the following options:

▪

Heating

: Only heating mode

▪

Cooling

: Only cooling mode

▪

Automatic

: The operation mode changes automatically

between heating and cooling based on the outdoor
temperature. Restricted per month according to the

Operation mode schedule

[4.2].

To restrict automatic changeover according to a schedule

Conditions:

You set the space operation mode to

Automatic

Summary of Contents for ETSH16P30EF




































































Search results

Summary of Contents for ETSH16P30EF

Reviews:

Related manuals for ETSH16P30EF

Brands by name

Popular brands

Daikin ETSH16P30EF, User Reference Manual

Search results

Summary of Contents for ETSH16P30EF

Reviews:

Related manuals for ETSH16P30EF

Brands by name

Popular brands