11
|
Configuration
Installer reference guide
235
ERGA04~V3A+V37 + EHSH/X(B)04+08P30+50EF
Daikin Altherma 3 R ECH₂O
4P678716-1 – 2022.01
c
Smar app
The Daikin Residential Controller app needs to be
installed on the user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
Configuration
To configure the Daikin Residential Controller app, follow the in-app instructions.
While doing this, the following actions and information are needed on the user
interface:
Mode
: Turn AP mode ON (= WLAN cartridge/module active as access point) or OFF.
#
Code
Description
[D.1]
N/A
Enable AP mode
:
▪
No
▪
Yes
Reboot
: Reboot the WLAN cartridge/module.
#
Code
Description
[D.2]
N/A
Reboot the gateway
:
▪
Back
▪
OK
WPS
: Connect the WLAN cartridge/module to the router.
#
Code
Description
[D.3]
N/A
WPS
:
▪
No
▪
Yes
INFORMATION
You can only use this function if it is supported by the software version of the WLAN,
and the software version of the Daikin Residential Controller app.
Remove from cloud
: Remove the WLAN cartridge/module from the cloud.
#
Code
Description
[D.4]
N/A
Remove from cloud
:
▪
No
▪
Yes
Home network connection
: Read out the status of the connection to the home
network.
#
Code
Description
[D.5]
N/A
Home network connection
:
▪
Disconnected from
[WLAN_SSID]
▪
Connected to
[WLAN_SSID]
Cloud connection
: Read out the status of the connection to the cloud.
