background image

EKHBRD011~Y1

Indoor unit for air to water heat pump system and options

4PW60971-1

Operation manual

10

Schedule timer operation

In schedule timer operation, the installation is controlled by the
schedule timer. The actions programmed in the schedule timer will be
executed automatically.

The schedule timer is enabled (

p

 icon displayed) or disabled (

p

 icon

not displayed) by pressing the 

pr

 button.

Space heating

Refer to "Programming space heating" on page 12.

Five actions per day of the week can be programmed, totalling 35
actions.

The space heating schedule timer can be programmed in 2 different
ways: based on the temperature set point (both leaving water
temperature and room temperature) and based on the ON/OFF
instruction.

The desired method is set through 

fi

eld setting. Refer to the chapter

"Field settings" on page 15 for a detailed description how to set one
or more 

fi

eld settings.

[0-03]

 Status: de

fi

nes whether ON/OFF instruction can be used

in the schedule timer for space heating.

In the following tables both methods on how to interpret the schedule
timer are shown.

Operation example

:  Schedule timer based on temperature set

points.

When setback function is enabled, the setback operation will have
priority over the scheduled action in the schedule timer.

NOTE

By default space heating based on temperature set
point (method 1) is enabled, so only temperature shifts
are possible (no ON/OFF instruction).

Advantage of this method is that you can simply switch
off the space heating operation by pushing the 

y

button without disabling the automatic domestic hot
water storage operation (e.g. during summertime
when no space heating is required).

Method 1
[0-03]=1 (default)

Space heating based on temperature set point

(a)

(a) For leaving water temperature and/or room temperature

During operation

During schedule timer operation the operation LED is lit 
continuously.

When pushing 
the 

y

 button

The schedule timer for space heating will stop and will 
not start again.
The controller will be switched off (operation LED will 
stop working).
However, the schedule timer icon will stay displayed 
which means that the domestic water heating stays 
enabled.

When pushing 
the 

r

/

p

 button

The schedule timer for space heating 

and

 domestic 

water heating along with the quiet mode will be stopped 
and will not start again.
The schedule timer icon will not be displayed anymore.

1

Schedule timer

2

Setback function

3

When both setback function and schedule timer are enabled

A

Setback function

t

Time

T

Temperature set point

Room temperature

Leaving water temperature

Method 2
[0-03]=0

Space heating based on ON/OFF instruction

During operation

When the schedule timer switches space heating OFF, 
the controller will be switched off (operation LED will stop 
working). Note that this has no in

fl

uence on the domestic 

water heating.

When pushing 
the 

y

 button

The schedule timer for space heating will stop (when 
active at that moment) and will start again at the next 
scheduled ON function.
The "last" programmed command overrules the 
"preceding" programmed command and will remain 
active until the "next" programmed command occurs.

Example: imagine the actual time is 17:30 and actions 
are programmed at 13:00, 16:00 and 19:00. The "last" 
programmed command (16:00) overruled the 
"previous" programmed command (13:00) and will 
remain active until the "next" programmed command 
(19:00) occurs.

So in order to know the actual setting, one should consult 
the last programmed command. It is clear that the "last" 
programmed command may date from the day before. 
Refer to "Consulting programmed actions" on page 14.
The controller will be switched off (operation LED will 
stop working).
However the schedule timer icon will stay displayed 
which means that the domestic heating stays enabled.

When pushing 
the 

r

/

p

 button

The schedule timer for space heating 

and

 domestic 

water heating along with the quiet mode will be stopped 
and will not start again.
The schedule timer icon will not be displayed anymore.

T

t

6:30

9:00

16:00

0:30

19

19

°

C

19

19

°

C

19

19

°

C

22

22

°

C

21

21

°

C

62

62

°

C

62

62

°

C

62

62

°

C

65

65

°

C

64

64

°

C

62

°

C

19

°

C

19

°

C

19

°

C

22

°

C

21

°

C

62

°

C

62

°

C

65

°

C

64

°

C

0:30

1

T

t

18

18

°

C

57

57

°

C

57

°

C

18

°

C

A

5:00

5:00

23:00

23:00

5:00

23:00

2

T

t

5:00

9:00

16:00

23:00

19

19

°

C

18

18

°

C

19

19

°

C

22

22

°

C

21

21

°

C

62

62

°

C

60

60

°

C

62

62

°

C

65

65

°

C

64

64

°

C

60

°

C

19

°

C

18

°

C

19

°

C

22

°

C

21

°

C

62

°

C

62

°

C

19

19

°

C

62

62

°

C

19

°

C

62

°

C

19

19

°

C

62

62

°

C

19

°

C

62

°

C

19

19

°

C

62

62

°

C

19

°

C

62

°

C

65

°

C

64

°

C

6:30

3

57

57

°

C

57

°

C

60

60

°

C

60

°

C

Summary of Contents for EKHBRD-ABV1

























Reviews: