Operation manual
25
EKHBH/X008BB
Indoor unit and options for air to water heat pump system
4PW62571-1A – 05.2011
Programming space heating
Programming space heating is carried out as follows:
1
Press the button.
The actual mode is blinking.
2
Use the
and
buttons to select the heating mode.
3
Press the button to confirm the selected mode.
The actual day is blinking.
4
Select the day you would like to consult or to program by means
of the
and
buttons.
The selected day is blinking.
5
Press the button to confirm the selected day.
6
Press the button for 5 seconds to enter the programming
mode.
7
Action number 1 will be displayed
8
Use the
and
buttons to set the correct action time
to
2:00
.
9
Use the
button to select
as action.
10
Use the button to select action number 2.
11
Use the
and
buttons to set the action time to
4:00
.
12
Use the
button to select what the unit should do from
4:00
onwards.
■
For space heating:
-
: set the temperature by means of the
and
buttons.
-
: to select automatic temperature calculation.
13
Press the button for 5 seconds to store the programmed
actions. When the program is stored, icon
is displayed
on the remote controller.
14
Repeat this sequence for all days of the week.
15
Now the unit is programmed to stop space heating between
2:00
and
4:00
. The unit will start space heating from
4:00
.
A
PPENDIX
(for restricted power supply condition mode only)
5 sec
5 sec
5 sec
5 sec
INFORMATION
■
This example describes the procedure when no
program is scheduled yet.
■
Returning to previous steps in the programming
procedure without saving modified settings is done by
pressing the
button.
INFORMATION
■
By pressing the
button several times, you
return to previous steps in this procedure and
finally return to normal operation.
■
Other actions can also be programmed. See
"4.7. Programming and consulting the schedule
timer" on page 9
.
