4 Operation
User reference guide
14
EGSQH10S18AA9W
Daikin Altherma ground source heat pump
4P3517491 – 2013.06
Advantage:
▪ Before and after your holiday, your normal schedule will be used.
▪ During your holiday, you save energy and prevent your house
from freezing.
Usage example: You come home during your holiday
If you are in the following situation:
▪ You configured and activated the holiday mode (Away).
▪ During your holiday, you come home for a few hours and want to
use your normal schedule.
Then you can do the following:
1
Deactivate the holiday mode.
2
When you go away again, activate the holiday mode again.
Advantage:
You do NOT have to change your schedule or holiday configuration.
4.6.3
Reading out information
About reading out information
The amount of information you can read out in the menu structure
([6]: Information) depends on your user permission level:
▪ End user (= default)
▪ Adv. end user: You can read out more information.
To switch between user permission levels (End user and
Advanced end user)
1
Go to [6] or any of its submenus:
> Information.
2
Press
for more than 4 seconds.
Result:
The user permission level switches to Adv. end user.
Additional information is displayed and "+" is added to the menu
title.
3
If you do NOT press any button for more than 1 hour or press
again for more than 4 seconds, the user permission level
switches back to End user.
To read out information
Go to [6]:
> Information.
Possible readout information
If user permission level = End user, you can read out the following
information:
In menu…
You can read out…
[6.1] Sensor information
Room, tank or DHW, and outside
temperature.
[6.2] Energy metering
Produced energy, consumed
electricity, and consumed gas.
[6.3] Error handling
Error history and contact/
helpdesk number.
[6.4] User permission level
Current user permission level.
If user permission level = Adv. end user, you can read out the
following additional information:
In menu…
You can read out…
[6.1] Sensor information
Room, tank or DHW, outside,
and leaving water temperature.
(If applicable)
[6.2] Energy metering
Produced energy, consumed
electricity, and consumed gas.
In menu…
You can read out…
[6.5] Actuators
Status/mode of each actuator.
Example:
Domestic hot water
pump ON/OFF.
[6.6] Operation modes
Current operation mode.
Example:
Defrost/oil return
mode.
[6.7] Running hours
Running hours of the system.
[6.8] Version
Version information about the
system.
4.6.4
Configuring date, time, units of
measurement, contrast and backlight
To configure time and date
Go to [1]:
> Set time/date.
To configure units of measurement
Go to [7.6]:
> User settings > Unit of measurement.
Possible units of measurement settings
Setting
Possible units of measurement
Decimal point
▪ Dot
▪ Comma
Temperature
▪ °C
▪ °F
Produced energy
▪ kWh
▪ MBtu
Flow
▪ l/min
▪ GPM
To configure the contrast of the user interface
Go to [7.1.1]:
> User settings > Display > Contrast.
To configure the backlit LCD time of the user interface
Go to [7.1.2]:
> User settings > Display > Backlit LCD time.
4.6.5
Configuring user profile and home pages
To set a user profile
1
Go to [7.1.3]:
> User settings > Display > User profile.
2
Select a user profile and press
.
Possible user profiles
If user profile = Detailed, you can see and do more on the home
pages.
User profile
Example
Basic
15:20
Mon
Room
Actual temperature
20.0°C
Detailed
15:20
Mon
Room
Actual temperature
20.0°C
Tue
17:30
Scheduled
