![background image](http://html.mh-extra.com/html/daikin/dbg-series/dbg-series_installation-instructions-manual_502121041.webp)
41
NOTE: Refer to IOD-7082 included in the literature pack for installing horizontal duct covers.
NOTE
For horizontal discharge, remove supply and return
duct cover panels from the end of the unit. Save
all washered screws. According to the model size,
remove (6 or 8) factory supplied panel clips that are
secured to the base pan, behind the filter access
panel. With the insulated side of the panel facing up,
attach the clips. Place the provided gasket material
completely around the perimeter of the clip side on
both panels. Place the assembled panels over the
supply and return duct openings in the base pan
and push down to snap panels into place. Ensure
the panel is evenly seated on the flanges around the
duct openings and the gasket is
APPENDIX C UNIT DIMENSIONS
Horizontal Discharge
Vertical Discharge (Bottom of Unit)
NOTE
For horizontal discharge, remove supply and return
duct cover panels from the end of the unit. Save
all washered screws. According to the model size,
remove (6 or 8) factory supplied panel clips that are
secured to the base pan, behind the filter access
panel. With the insulated side of the panel facing up,
attach the clips. Place the provided gasket material
completely around the perimeter of the clip side on
both panels. Place the assembled panels over the
supply and return duct openings in the base pan and
push down to snap panels into place. Ensure the
panel is evenly seated on the flanges around the duct
openings and the gasket is creating a good seal.
60.36"
93.75"
54.27"
Summary of Contents for DBG Series
Page 44: ...44 ...
Page 45: ...45 ...
Page 46: ...46 THIS PAGE IS INTENTIONALLY LEFT BLANK ...