5
|
Operation
User reference guide
35
FTXA25~50(A)(B)2V1B(W)(S)(T)(B)
Daikin room air conditioner
4P518786-1F – 2020.05
5
Press
to exit the menu.
Result:
The display will return to the default screen.
To connect using SSID and KEY number
1
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display (menu ) appears.
2
Press repeatedly
or
until the AP mode display (menu ) appears.
3
Press
to confirm the selection.
Result:
is blinking. The operation and timer LEDs are blinking alternately.
4
Connect your smart device to the access point in the same way as to a
standard wireless network.
5
Enter the SSID number and password located on the unit or in the accessory
set.
6
Open the Daikin Online Controller application and follow the steps on the
screen.
Result:
Wireless adapter mode will automatically change from the AP mode to
the RUN mode, the timer LED is blinking.
7
Press
to exit the menu.
Result:
The display will return to the default screen.
To reset the connection setting to the factory default
Reset the connection setting to the factory default in case you want to:
▪
switch between the WPS and the AP connection option,
▪
disconnect the Wi-Fi adapter and the communication device (e.g. router) or
smart device,
▪
repeat the setting if the connection was unsuccessful.
1
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display(menu ) appears.
2
Press repeatedly
or
until the A display (menu ) appears.
3
Hold
for at least 2 seconds to confirm the selection.
Result:
is blinking. The setting is reset to the factory default.
4
Press
to exit the menu.
Result:
The display will return to the default screen.
Summary of Contents for CTXA15A2V1BW
Page 54: ......
Page 55: ......
Page 56: ...4P518786 1F 2020 05 Copyright 2017 Daikin Verantwortung f r Energie und Umwelt...
