Daikin CTXA15A2V1BW, User Reference Manual

Page: 21 / 56

5 | Operation
User reference guide
21
FTXA25~50(A)(B)2V1B(W)(S)(T)(B)
Daikin room air conditioner
4P518786-1F – 2020.05
INFORMATION
▪
If the unit reach the temperature setpoint in cooling, heating or automatic mode.
Fan will stop operating.
▪
When using drying operation mode, you CANNOT adjust the airflow rate setting.
5.4.1 To adjust the airflow rate
1 Press to change the airflow setting as follows:
5.5 Airflow direction
When. Adjust the airflow direction as desired.
What. The system directs the airflow differently, depending on the user selection
(swinging or fixed position). It does so by moving horizontal blades (flaps) or
vertical blades (louvers).
Setting Airflow direction
Vertical automatic swing
Moves up and down.
Horizontal automatic
swing
Moves from side to side.
+ 3-D airflow direction
Moves alternately up and down and from side
to side
[—] Stays in a fixed position.
CAUTION
ALWAYS use a user interface to adjust the position of the flaps and louvers. When
the flaps and louvers are swinging and you move them forcibly by hand, the
mechanism will break.
The movable range of the flap varies according to the operation mode. The flap will
stop at the upper position when the airflow rate is changed to low during the up
and down swing setting.
a
b
a Flap range in cooling or drying operation
b Flap range in heating or fan only operation