Daikin CTKJ25RVMAS, Operation Manual

Page: 6 / 44

Display
5
Names of Parts
Indoor Unit
Air inlet
Upper front
panel
Air outlet
Louvres (vertical blades)
• The louvres are inside of the air outlet. Page 13
INTELLIGENT EYE
sensor
• Detects the movements of
people and automatically
switches between normal
operation and energy saving
operation.
Page 15-17
Flaps
(horizontal
blades)
Page 13
INTELLIGENT EYE lamp
(green)
Page 16
Signal receiver and Indoor
unit ON/OFF switch
Signal receiver
• Receives signals from the remote
controller.
• When the unit receives a signal, you will
hear a beep sound.
Case Sound type
Operation start beep-beep
Setting changed beep
Operation stop long beep
Indoor unit ON/OFF switch
• Press this switch once to start operation.
Press once again to stop it.
• For the operation mode setting, refer to the following
table.
Model Mode
Temperature
setting
Airfl ow
rate
HEAT PUMP AUTO 25.0°C AUTO
COOLING ONLY
COOL 22.0°C AUTO
• This switch can be used when the remote controller is
missing.
TIMER lamp
• When operation by timer has been set, the multi-monitor lamp
periodically changes to orange. After lighting orange for about
5 seconds, it returns to the colour of the operation mode.
The multi-monitor lamp will turn orange on and off in cyclic
manner while the air conditioner is not in operation.
TIMER lamp colour
TIMER lamp colour: For COOL
Orange
Blue
3 min.
5 sec. 5 sec.
2 sec. 2 sec. 2 sec.
Green Orange DRY:
COOL: Blue Orange
HEAT: Red Orange
FAN: White Orange
Stop:
Off Orange
Indoor temperature
sensor
• Detects the air temperature
around the unit.
Multi-monitor lamp and
TIMER lamp
Multi-monitor lamp
• The lamp colour changes according to
the operation.
Operation Multi-monitor lamp
AUTO* Red/Blue
DRY Green
COOL Blue
HEAT* Red
FAN White
TIMER Orange
* Only for HEAT PUMP models
Lower front panel
• It is located on the back of the
upper front panel during operation.
01_EN_3P472684-1.indd 5 6/13/2017 9:01:24 AM