Daikin CTKJ25RVMAS Operation Manual Download Page 22

Page: 22 / 44

ECONO / OUTDOOR UNIT
QUIET Operation

To start operation

Press

and select the desired mode.

•

Each time

is pressed, a different setting option is displayed on the LCD.

ECONO

OUTDOOR UNIT

QUIET

blank

No Setting

Combination

To cancel operation

Press

until no icon is displayed.

NOTE

Notes on ECONO operation

•

Pressing

causes the settings to be cancelled, and “

” disappears from the LCD.

• If the power consumption level is already low, switching to ECONO operation will not reduce the power consumption.

Notes on OUTDOOR UNIT QUIET operation

• If using a multi system, the OUTDOOR UNIT QUIET operation will work only when this function is set on all operated indoor units. However, if

using priority room setting, refer to

“Note for Multi System”

Page 31

• Even if the operation is stopped by using the remote controller or the indoor unit ON/OFF switch when using OUTDOOR UNIT QUIET

operation, “

” will remain displayed on the remote controller.

•

OUTDOOR UNIT QUIET operation will not reduce the frequency nor fan speed if they already are operating at reduced levels.

• This operation is performed with lower power and therefore may not provide a suffi cient cooling (heating) effect.

Possible combinations of ECONO / OUTDOOR UNIT QUIET operation and basic operations

Operation mode

AUTO

DRY

COOL

HEAT

FAN

ECONO

–

OUTDOOR UNIT QUIET

–

01_EN_3P472684-1.indd 21

6/13/2017 9:01:38 AM

Summary of Contents for CTKJ25RVMAS













































Search results

Summary of Contents for CTKJ25RVMAS

Reviews:

Related manuals for CTKJ25RVMAS

Brands by name

Popular brands

Daikin CTKJ25RVMAS, Operation Manual

Search results

Summary of Contents for CTKJ25RVMAS

Reviews:

Related manuals for CTKJ25RVMAS

Brands by name

Popular brands