![background image](http://html.mh-extra.com/html/daikin/ctkc50wvmg/ctkc50wvmg_operation-manual_2460467013.webp)
12
Basic Operation
Basic Operation
Adjusting the Airflow Direction
You can adjust the airflow direction to increase your comfort.
CAUTION
•
Always use a remote controller to adjust the angles of the flaps. Moving the flaps forcibly by hand may
cause a malfunction.
•
Be careful when adjusting the louvres. Inside the air outlet, a fan is rotating at a high speed.
To start auto swing
Up and down airflow direction
Press
.
•
“ ” is displayed on the LCD.
•
The flaps (horizontal blades) will begin to swing.
To set the flaps at the desired position
•
This function is effective while the flaps are in auto swing mode.
Press
when the flaps reach the desired
position.
•
“ ” disappears from the LCD.
To adjust the louvres at desired position
Hold the knob and move the louvres
(vertical blades).
• There is a knob in 3 places.
Knobs
NOTE
Notes on airflow direction setting
•
The movable range of the flaps vary according to the operation mode.
•
The flaps will stop at the upper position when the airflow rate is changed to low during
the up and down swing setting.
Movable range of the flaps
COOL / DRY
FAN ONLY
01_EN_3P529266-7D.indd 12
10/11/2564 8:35:12