cm-cliv-cf-eng
www.clima-flex.com
5
EFFICIENCY
Our units are designed to efficiently meet the air conditioning needs
of any project. Our units have controls, logic routines and digital
sensors that continuously monitor the system to adapt its operation
to the level necessary to maintain optimal system conditions at all
times, thus achieving maximum performance and energy savings
in a system that is simple to operate and maintain.
All temperature sensors are calibrated and adjusted at the factory
prior to shipment.
The start-up of the equipment must be carried out by a qualified
technician, during the initial start-up the unit will be adjusted to the
local conditions and all operating points will be checked.
Once the unit has been properly installed, the operation is a matter
of pressing the digital start and stop button, until making sure that
the unit works properly, after this the unit will operate automatically,
turning on by itself according to the demand of the system and
local conditions.
FLEXIBILITY
Through intelligent processors and digital sensors, our equipment
automatically modulates the operation of the system to maintain
the water temperature at optimal operating conditions.
CONSTRUCTION
The structures of our units are made of galvanized steel sheet,
coated with baked electrostatic powder paint (meets the
ASTM-B117 1500 hour salt spray test) to ensure long durability
and absence of corrosion under any weather conditions, such as
direct solar light, rain and wind.
All our units are designed to fit into a reduced installation space,
thus eliminating large installation areas. We only use high-
quality components to ensure durability and safety, even in harsh
environmental conditions.
NOTE: For applications in highly corrosive climates our units
can be coated inside and out with extra protection against
corrosion. Ask your sales agent for more information.
Our units have AHRI performance and efficiency certifications, and
ETL safety certifications, in addition to complying with all industry
safety standards.
We are members of the American Society of Air Conditioning,
Refrigeration and Heating Engineers (ASHRAE).
To show our commitment to our clients and stakeholders; our
equipment has a 1-year warranty after commissioning and start up.
Our units use R410A refrigerant, which is harmless to the ozone
layer and the most eco-friendly option possible.
All of our units are designed and manufactured with a focus on
safety, performance and quality.
DESIGN
The work carried out by our Engineering and Development
department has resulted in equipment with high design efficiency
and optimum performance during operation.
The selection of high quality main components, our quality
processes and the control system during manufacturing, guarantee
a high performance and safe unit.
All main components are rigorously tested and validated before
being installed. Each designed unit has undergone long hours
of rigorous testing to ensure the efficiency, safety, durability and
quality of the entire system.
All external paint is baked and meets the strictest quality standards
(1500 hour salt spray test ASTM-B117).The selection of high-end
compressors and heat exchangers ensure the capacity and high
efficiency of the unit.
Optional water pumps* are specially designed to function properly
with minimal vibration and noise.
All our units have a reduced footprint, which facilitates installation
and maintenance maneuvers, by being able to use stairs, doors
and service elevators to move them.
* Ask your sales rep about factory integrated pump options.
COMMUNICATIONS
The operation of the unit and user access will be done through a
LED or color touch screen*
Our units can be connected / integrated through different
communication protocols; such as TCP / IP, ModBUS and BacNet
**, the most common protocols used in the Air Conditioning industry.
Our units keep track of all programmable variables in real time,
such as load monitoring in the system, specific alarms of the
refrigeration cycle, water cycle and the electrical system. As well as
detection of external factors such as fire or flood (optional sensors).
The control system ensures the correct operation of the equipment
by monitoring in real time the condition of the major components
(high or low pressure of the refrigerant, conditions of the compressor
and fan motors, etc.).
In case of failure, the event alarm will be recorded for later analysis,
facilitating the location of a possible failure and its solution.
* Depends on the type of control.
** The communication protocols available depend on the type of
control.
INSTALLATION
The units have been designed for easy and simple installation.
Victaulic type (grooved) fittings provide a simple and safe way to
make water the pipe connections. These connections are located
on both sides of the equipment, which provides great flexibility for
water connections.
The individual assembly of the equipment reduces the cost of
installation, the units have a rigid base that balances the weight of
the unit and allows easy installation.
MAINTENANCE
The simplicity in the design of the unit allows maximum ease when
performing preventive / corrective maintenance on them. All major
components are available to the maintenance personnel by simply
opening the service panels.
If an emergency stop occurs, the digital control of the unit will
indicate in detail the cause of the alarm, helping to facilitate and
speed up its solution.
FUNCTIONAL TESTING
Before leaving the factory, our units are tested multiple times.
Pressure and vacuum tests are performed to detect possible leaks.
Once the unit is verified to be leak free, the refrigerant is charged
accurately for proper operation based on customer installation
conditions.
All units are evaluated and tested at full load operation, with water
Features / Benefits
