Daikin CDXS25BVMB, Installation Manual

Page: 8 / 11

7
1
2
3
When wire length exceeds
10 m, use 2.0-mm wires.
1.6mm or 2.0mm
To outdoor unit
Indoor
unit
Firmly fix the wires with
the terminal screws.
H05VV
S21
Wire retainer
Use the specified wire type.
Shape wires so that the
service lid will fit securely.
Firmly secure wire retainer so that wires
sustain no external stress.
Terminal block
Electrical component box
Watering can
Do not raise.
Do not bend.
Do not leave
in water.
Drain pipe (3/4 B)
Nominal
diameter 26 Rubber plug
Completely insulate Completely insulate
Units: mm
DRAIN WORK
WIRING
See the installation manual supplied with the Multi outdoor unit for outdoor unit.
(1) Strip wire ends (15 mm).
(2) Match wire colours with terminal numbers on indoor and outdoor units’ terminal blocks and firmly screw wires to the
corresponding terminals.
(3) Connect the earth wires to the corresponding terminals.
(4) Pull wires to make sure that they are securely latched
up, then retain wires with wire retainer.
(5) In case of connecting to an adapter system.
Run the remote control cable and attach the S21
connector as the illustration on the right.
(6) Shape the wires so that the
service lid fits securely, then
close service lid.
■
Connect the drain pipe as described below.
●
The drain pipe outlet can be either on the right or left side.
●
After making the connection, wrap the drain pipes completely with insulation.
●
When connecting the drain pipe to the outlet on the left side, remove the rubber plug and attach it to the outlet on the
right side.
■
Pour some water into the drain pan to check that the
water drains smoothly.
Warning
Do not use tapped
wires,stand wires,
extensioncords, or starbust
connections, as they may
cause overheating,
electrical shock,or fire.