BYCQ14 BYCQ140 BYCQ140E2GFW1B
Installation manual
Self cleaning decoration panel
4P558847-1B 2019.02
4
(1) Turn the two fixing knobs of the dust box.
Dust box
(The front side of the panel is shown for ease of explanation.)
Fixing knob
Fixing knob
(2)
Remove the dust box from the panel while paying attention not
to cut the fall prevention cord.
Dust box
Fall prevention cord
2
1
(3)
Remove the fall prevention cord for the dust box from the
clasp bracket of the panel.
Remove the fall
prevention cord from
the clasp bracket.
Clasp
Dust box
Fall prevention cord
Panel
5. Preparations for indoor unit
WARNING
Check that the indoor and outdoor units are turned power off
before conducting wiring work.
Otherwise, an electric shock may be received.
CAUTION
• Conduct the following work after installing the indoor unit.
• Install the indoor unit according to the installation manual
provided with the indoor unit.
5-1 Attaching spacer (accessory (1))
(1)
Remove the bypass hole closing cap.
1
2
2
1
Indoor unit
2
Remove the bypass hole closing cap
(2) Peel off the release paper of the double-stick tape on the
backside of the spacer (accessory (1)).
(3) Attach the spacer (accessory (1)) on the air bypass hole.
Check that the air bypass hole is not blocked after the spacer
is attached.
4
4
3
1
2
1
Air bypass hole
2
Pasted to align with the air bypass hole
3
Align the corners
4
Spacer (accessory (1))
5-2 Attaching harness (accessory (4))
(1)
Remove the EL. COMPO. BOX lid from the indoor unit.
Claws
EL. COMPO. BOX lid
Screws
(2 points)
Loosen the screws (in two points) and slide the EL. COMPO. BOX
lid in the direction of the arrow to unhook the lid from the claws.
