Daikin BRP069C51, Installation Manual

Page: 3 / 8

3 About the adapter
Installation manual
3
BRP069C51
Wireless LAN connecting adapter
4P567679-2C – 2020.05
3 About the adapter
Wireless LAN adapter to connect the heat pump system to the
Daikin Cloud via the internet, allowing for control of the heat pump
system with the Daikin Residential Controller app.
3.1 Components
a
b
c
d
e
a RUN lamp (orange). Lights when connecting to a router
(wireless LAN access point).
b AP lamp
c SETUP button. Use when connecting to a router
(wireless LAN access point).
d MODE button
e POWER button. Turns the WLAN adapter ON/OFF when
pressed.
3.2 Basic parameters
Parameter Value
Frequency range 2400 MHz~2483.5 MHz
Radio protocol IEEE 802.11b/g/n
Radio frequency channel 13 ch
Output power 13 dBm
Effective radiated power 15 dBm (11b) / 14 dBm (11g) /
14 dBm (11n)
Power supply DC 14 V / 100 mA
3.3 Compatibility
Make sure the indoor unit is compatible for use with the adapter. For
the latest details about installation of the adapter and applicable
units, visit
http://www.onlinecontroller.daikineurope.com/ .
4 About the box
4.1 To unpack the adapter
1 Open the box.
2 Take out the adapter.
3 Separate the accessories.
c a d b
h
e f g
i
a Adapter
b Screws (M3×8) for the adapter
c Adapter holder with double face tape
d Mounting screws for the holder (M3×16)
e Cable tie mounting
f Cable tie
g Connection cable
h Serial number sticker (SSID, KEY, MAC)
i Installation manual
5 Installation
5.1 Precautions when installing the
adapter
DANGER: RISK OF ELECTROCUTION
▪ Turn off the power supply before installing the adapter.
▪ Do NOT handle the adapter with wet hands.
▪ Do NOT let the adapter get wet.
▪ Do NOT disassemble, modify or repair the adapter.
▪ Grip the connector when disconnecting the connection
cable.
▪ Turn off the power supply in case the adapter gets
damaged.
5.2 Preparing the installation site
5.2.1 Installation site requirements
The adapter is designed to be mounted to the indoor unit, in dry,
indoor locations only.
5.3 Connecting the electrical wiring
DANGER: RISK OF ELECTROCUTION
Do NOT turn on the power supply before you have
connected the electrical wiring, closed the adapter, and
mounted it to the indoor unit.