Daikin BRP069A61, Installer'S Reference Manual

Page: 4 / 16

4 Preparation
Installer reference guide
4
BRBRP069A62
Daikin Altherma LAN adapter
4P464229-1A – 2017.11
Accessories: BRP069A61
2× 1× 1×
a b c
1×
d
3× 3× 3×
f
1×
e f g h
4×
i
1× 1×
j k
a Installation manual
b 6-pole slide connector for X1A
c 2-pole slide connector for X2A
d 2-pole plug connector for X3A
e Ethernet cable
f Grommets
g Screws to mount rear casing
h Plugs to mount rear casing
i Screws to mount PCB
j Screw to close front casing
k Cable tie
Accessories: BRP069A62
3× 4× 3× 2× 1× 1× 1×
a b c
1×
d
e f g h
a Installation manual
b 2-pole plug connector for X3A
c Ethernet cable
d Grommet
e Screws to mount rear casing
f Plugs to mount rear casing
g Screws to mount PCB
h Screw to close front casing
4 Preparation
4.1 Installation site requirements
INFORMATION
Also read the maximum cable length requirements set out
in
"4.2 Overview of electrical connections" on page 4 .
▪ Mind the following spacing installation guidelines:
>30 mm >30 mm
>90 mm
(a)
>160 mm
(b)
(a) Provide enough space to connect the Ethernet cable
without exceeding its minimum bend radius (typically
90 mm)
(b) Provide enough space to open the casing with a flat-blade
screwdriver (typically 160 mm)
▪ The LAN adapter is designed to be wall-mounted in dry, indoor
locations only. Make sure the installation surface is a flat and
vertical non-combustible wall.
▪ The LAN adapter is designed to be mounted in the following
orientation only: with the PCB on the right-hand side in the casing,
and the Ethernet connector facing the floor.
▪ The LAN adapter is designed to operate in ambient temperature
ranging from 5~35°C.
Do NOT install the LAN adapter in the following places:
▪ In places with high humidity (max. RH=95%), such as bathrooms.
▪ In places where frost is possible.
4.2 Overview of electrical connections
Connectors
X4A
4
N
L
3
2
1
2
1
230 V AC
X1A
X2A
X3A
b
a
c
d
b
e
a BRP069A61 only
b To digital inputs of solar inverter / energy management
system
c To electrical pulse meter
d To indoor unit
e To router
Connections
Connection Cable section Wires Maximum
cable length
Accessory cables
Router (X4A) — — 50/100 m
(a)
Field-supplied cables