B533F
Wireless remote controller kit
4PW29216-1
Operation manual
3
H
ANDLING
FOR
WIRELESS
REMOTE
CONTROLLER
Precautions in handling remote controller
■
Direct the transmitting part of the remote controller to
the receiving part of the air conditioner.
■
If something blocks the transmitting and receiving
path of the indoor unit and the remote controller as
curtains, it will not operate.
■
Transmitting distance is approximately 7 m.
■
2 short beeps from the receiver indicates that the
transmission is properly done.
■
Do not drop or get it wet.
It may get damaged.
■
Never press the button of the remote controller with a
hard, pointed object.
The remote controller may get damaged.
Installation site
■
It is possible that signals will not be received in rooms
that have electronic fluorescent lighting. Please
consult with the salesman before buying new
fluorescent lights.
■
If the remote controller operated some other
electrical apparatus, move that machine away or
consult your dealer.
Placing the remote controller in the remote
controller holder
Install the remote controller holder to a wall or a pillar
with the attached screw. Make sure the remote controller
transmits.
How to put the batteries
1
Remove the back cover
of the remote controller to
the direction pointed by
the arrow mark.
2
Insert the batteries.
Use two LR03<AAA> dry
cell batteries. Put the dry
batteries correctly to fit
their (+) and (–). Close
the cover.
When to change batteries
Under normal use, batteries last about a year. However,
change them whenever the indoor unit doesn't respond
or responds slowly to commands, or if the display
becomes dark.
In case of a centralized control system
If the indoor unit is under centralized control, it is
necessary to switch the remote controller's setting. In this
case, contact your dealer.
Placing
the remote controller
Removing
the remote controller
Slide from above
Pull it upward
1
Remote controller holder
NOTE
Replace the two batteries at the same time,
do not use new and old batteries intermixed.
In case the remote controller is not used for
a long time, take out all batteries in order to
prevent liquid leak of the battery.
1
