5 Status icons
Installer and user reference guide
5
BK+S
Wired remote controller
4P513690-1 – 2018.03
5
Status icons
Icon
Description
System operation ON.
Indicates that the system is in
operation.
System operation OFF.
Indicates that the system is
NOT in operation.
Bluetooth
.
1
Indicates that the controller is
communicating with a mobile device, for use with the
Madoka Assistant app.
Centralised control.
Indicates that the system is
controlled by central control equipment (optional
accessory) and that control of the system by the
controller is limited.
Changeover under centralised control.
Indicates
that the cooling/heating changeover is under
centralised control by another indoor unit, or by an
optional cool/ heat selector that is connected to the
outdoor unit.
Defrost/Hot start.
Indicates that the defrost/hot start
mode is active.
Timer.
Indicates that the schedule timer or OFF timer
is enabled.
Clock not set
. Indicates that controller's clock is not
set.
Self-cleaning filter operation.
Indicates that self-
cleaning filter operation is active.
Quick Start.
Indicates that Quick Start mode is active
(Sky Air only).
Test operation.
Indicates that Test Operation mode
is active (Sky Air only).
Inspection
. Indicates that the indoor or outdoor unit is
being inspected.
Periodic inspection.
Indicates that the indoor or
outdoor unit is being inspected.
Backup.
Indicates that in the system an indoor unit is
set as backup indoor unit.
Individual airflow direction
. Indicates that the
individual airflow direction setting is enabled.
Information.
Indicates that the system has a
message to convey. To see the message, go to the
information screen.
Warning.
Indicates that an error occurred, or that an
indoor unit component needs to be maintained.
Demand control.
Indicates that the system's energy
consumption is being limited, and that it is running
with restricted capacity.
End of demand control.
Indicates that the system's
energy consumption is no longer being limited, and
that it is no longer running with restricted capacity.
Rotation.
Indicates that Rotation mode is active.
Setback
. Indicates that the indoor unit is operating
under setback conditions.
Icon
Description
Ventilation
. Indicates that a heat reclaim ventilation
unit is connected.
INFORMATION
▪ For information on the operation mode and ventilation
mode icons, see
"6.1 Operation mode" on page 5
"6.5.1 Ventilation mode" on page 8
▪ Most icons are related to things set in the Madoka
Assistant app. For more information, see the app.
6
Operation
From the home screen, press
to enter the main menu. Use
and
to cycle through the menus. Press
again to enter one of
the menus.
INFORMATION
▪ Depending on the type of indoor unit you are operating,
more or less menus may be available.
▪ In the main menu, the icon for each menu reflects the
current active setting or mode. When operating the
controller, the menu you navigate through can look
different from that represented in this manual.
▪ The controller only allows for basic operation of the
system. For advanced operation (setback, schedule
timer, …), see the Madoka Assistant app.
6.1
Operation mode
The indoor unit can operate in various operation modes.
Icon
Operation mode
Cooling.
In this mode, cooling will be activated as
required by the setpoint, or by Setback operation..
Heating
. In this mode, heating will be activated as
required by the setpoint, or by Setback operation.
Fan Only
. In this mode, air circulates without heating
or cooling.
Dry
. In this mode, the air humidity will be lowered with
a minimal temperature decrease.
The temperature and fan speed are controlled
automatically and cannot be controlled by the
controller.
Dry operation will not function if the room temperature
is too low.
Ventilation
.In this mode, the space gets ventilated,
but not cooled or heated.
Air Clean
. In this mode, the optional air cleaning unit
operates.
Venti Air Clean.
Combination of ventilation
and air clean operation.
Auto.
In Auto mode, the indoor unit automatically
switches between heating and cooling mode, as
required by the setpoint.
(1)
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and use of such marks by
Daikin Europe N.V. is under license. Other trademarks and trade names are those of their respective owners.
