Daikin BRC1H81W Installer And User Reference Manual Download

Page: 14 / 40

14 Configuration

Installer and user reference guide

BK+S

Wired remote controller

4P513690-1 – 2018.03

Information

Description

Status icons

Depending on operation status,
the information screen can
contain various status icons. For
the meaning of those icons, see

"5 Status icons" on page 5

When the information screen has

information to convey,

displayed in the top left corner of
the home screen.

INFORMATION

The presence of icons on the information screen depends
on operation status. The controller may display more or
less icons than are indicated here.

To enter the information screen

Prerequisite:

The controller displays the home screen.

Press

and keep it pressed until the information screen

appears.

INFORMATION

The presence of icons on the information screen depends
on operation status. The controller may display more or
less icons than are indicated here.

13.4.2

Information menu

You can consult additional information in the information menu,
which is part of the installer menu. For instructions on how to enter
the information menu, see

"14.1 Installer menu" on page 14

and

"Information" on page 27

Configuration

14.1

Installer menu

14.1.1

About the installer menu

In the installer menu you can make the following settings:

Category

Icon

Settings

Screen settings

Brightness

Contrast

Status indicator settings

Intensity

Category

Icon

Settings

Field settings

Indoor unit field settings

Remote controller field
settings

Miscellaneous settings

Group address and AirNet
address

External input interlock

Force fan ON

Switch Cooling/Heating
master

Information

To enter the installer menu

Prerequisite:

The controller displays the home screen.

Press

and keep it pressed until the information screen

appears:

INFORMATION

The presence of icons on the information screen depends
on operation status. The controller may display more or
less icons than are indicated here.

From the information screen, press

and

simultaneously

and keep them pressed until you enter the installer menu:

Result:

You are now in the installer menu.

14.1.2

Screen settings

To set screen brightness

Prerequisite:

You are in the installer menu.

Navigate to the screen brightness menu.

Use

and

to adjust screen brightness.

Summary of Contents for BRC1H81W








































Search results

Summary of Contents for BRC1H81W

Reviews:

Related manuals for BRC1H81W

Brands by name

Popular brands

Daikin BRC1H81W, Installer And User Reference Manual

Search results

Summary of Contents for BRC1H81W

Reviews:

Related manuals for BRC1H81W

Brands by name

Popular brands