14 Configuration
Installer and user reference guide
23
BK+S
Wired remote controller
4P513690-1 – 2018.03
Address
Description
Second level
Define an address for the indoor/outdoor unit.
To SET an address, make sure
is selected.
Apply settings.
To RELEASE an address that was previously set, change
to
and then apply
settings.
External input interlock
About external input interlock
External input interlock allows for the integration of key card and
window contact logic into the system.
External input interlock is only available in case digital input adapter
BRP7A5* is part of the system. When the adapter is part of the
system:
▪ it is not possible to connect a second (slave) controller, and
▪ the schedule function will be disabled for as long the adapter is
connected to the indoor unit.
Make sure that the digital input adapter and its optional contacts
(window contact B1 and key card contact B2) are correctly installed.
Confirm that the voltage free contact of the digital input adapter is in
the correct position. For instructions on how to install the digital input
adapter, see the installation manual of the digital input adapter.
In case the digital input adapter does not function properly, the
external input interlock menu is not available in the installer menu.
In case a centralised controller is additionally part of the system,
external input interlock is controlled by the centralised controller. The
digital input adapter is then overruled.
To make external input interlock settings
Prerequisite:
You are in the installer menu.
1
Navigate to the external input interlock menu.
2
Use
and
to navigate through the menu.
3
Press
to select a parameter.
4
With a parameter selected, use
and
to change that
parameter's value.
5
With a parameter selected, press
to confirm the value for
that parameter.
6
When you are done making settings, confirm all settings by
selecting
and pressing
.
Result:
The system will restart and implement any changes made.
INFORMATION
For an overview of settable parameters and what they
mean, see
"External input interlock settings overview" on
.
External input interlock settings overview
Parameter
Description
Possible values
Default value
B2
Delay Timer
Timer that starts as soon as the
key card is removed. The unit
continues normal operation until
the timer expires.
0-10 minutes
"1 min"
