Daikin BRC1E72, Operation Manual

Page: 7 / 148

English 5
Operation mode selector button 1.
Press this button to select the operation ●
mode of your preference. (See page 10.)
Available modes vary with the indoor unit *
model.
Fan speed control button 2.
Press this button to select the fan speed of ●
your preference. (See page 11.)
Available fan speeds vary with the indoor *
unit model.
Menu/OK button 3.
Used to indicate the main menu. ●
(See page 20 for the menu items.)
Used to enter the selected item. ●
Up button 4.
Used to raise the setpoint. ●
The item above the current selection will be ●
highlighted.
(The highlighted items will be scrolled
continuously when the button is
continuously pressed.)
Used to change the selected item.
●
Down button 5.
Used to lower the setpoint. ●
The item below the current selection will be ●
highlighted.
(The highlighted items will be scrolled
continuously when the button is
continuously pressed.)
Used to change the selected item.
●
Right button 6.
Used to highlight the next items on the ●
right-hand side.
Each screen is scrolled in the right-hand
●
direction.
Left button 7.
Used to highlight the next items on the ●
left-hand side.
Each screen is scrolled in the left-hand
●
direction.
On/Off button 8.
Press this button and system will start. ●
Press this button again to stop the system. ●
Operation lamp (Green) 9.
This lamp illuminates solid during normal ●
operation.
This lamp blinks if a error occurs.
●
Cancel button 10.
Used to return to the previous screen. ●
LCD (with backlight) 11.
The backlight will be illuminated for ●
approximately 30 seconds by pressing any
button.
If two remote controllers are used to control
●
a single indoor unit, only the controller to
be accessed
fi rst will have backlight
functionality.
01_EN_3P243520-3E.indd 5 01_EN_3P243520-3E.indd 5 9/11/2012 4:12:37 PM 9/11/2012 4:12:37 PM