![background image](http://html1.mh-extra.com/html/daikin/brc1e52a/brc1e52a_technical-data-manual_2460443008.webp)
• Wired remote control • BRC1E52A - BRC1E52B
• Accessories • Wired remote control
6
2
4
4
Explanation of buttons and functions
1. Operation mode selector button
Press this button to select the operation
mode of your preference.
(See page 21.)
* Available modes vary with the connecting
model.
2.
setting button
direction setting screen.
(See page 14.)
*
vary with the connecting model.
3. Menu/Enter button
Used to indicate the main menu.
(See page 25 for the menu items.)
Used to enter the setting item selected.
4. Up button (Be sure to press the
part with the symbol )
Used to raise the set temperature.
The next items on the upper side will be
highlighted.
(The highlighted items will be scrolled
continuously when the button is kept
pressed.)
Used to change the item selected.
5. Down button (Be sure to press
the part with the symbol )
Used to lower the set temperature.
The next items on the lower side will be
highlighted.
(The highlighted items will be scrolled
continuously when the button is kept
pressed.)
Used to change the item selected.
6. Right button (Be sure to press
the part with the symbol )
Used to highlight the next items on the
right-hand side.
Each screen is scrolled in the right-hand
direction.
7. Left button (Be sure to press
the part with the symbol )
Used to highlight the next items on the
left-hand side.
Each screen is scrolled in the left-hand
direction.
8. On/Off button
Press this button and system will start.
Press this button again and system will
stop.
9. Operation lamp (Green)
This lamp lights up during operation.
This lamp blinks if a error occurs.
10. Cancel button
Used to return to the previous screen.
11. LCD (with backlight)
The backlight will be light for approximately
30 seconds by pressing any operation
button. Operate buttons excluding the On/
Off button while the backlight is lit.
If 2 remote controllers are used to control a
single indoor unit, the backlight of the
remote controller operated earlier than the
other one will be lit.