• Wired remote control • BRC1E52A - BRC1E52B
• Accessories • Wired remote control
8
2
4
4
Explanation of buttons and functions
1. Operation mode
Used to display the present operation
mode Cool, Heat, Vent, Fan, Dry or Auto
mode.
2. Fan speed
Used to display the fan speed that is set for
the air conditioner.
The fan speed will not be displayed if the
air conditioner does not have fan speed
control function.
3. Set/Setback temperature
display
When the unit is turned on,
Set to
indicates
the temperatures that are set for the air
conditioner.
When the unit is turned off,
Setback
indicates the temperatures that are set for
the setback function.
4. Defrost/Hot start "
"
(See page 16.)
If Ventilating operation "
" is displayed:
Displayed when a total heat exchanger
unit, such as the Ventiair, is connected.
For details, refer to the Operation Manual
of the Ventiair.
5. Message
The following messages are displayed.
"This function not available."
Displayed for a few seconds when an
operation button is pressed if the indoor
unit is not provided with the corresponding
function.
If a number of indoor units are in operation,
the message will appear only if none of the
indoor units is provided with the
corresponding function, i.e., the message
will not appear if at least one of the indoor
units is provided with the corresponding
function.
"Error: Press Menu Button."
"Warning: Press Menu Button."
Displayed if an error or a warning is
detected
(see page 63)
.
"Quick Start"
(SkyAir only)
Displayed if the quick cooling/heating
function is turned ON
(see page 32).
#$#
"Time to clean element."
#$#
or element has come
(see page 61).
6. Ventilation/Purifying
Displayed when a total heat exchanger
unit, such as the Ventiair, is connected.
Ventilation mode icon."
"
These icons indicate the current ventilation
mode (HRV only) (AUTOMATIC, ENERGY
RECLAIM VENTILATION, BYPASS).
%&'*+%,-#;
"
This icon indicates that the air cleaning unit
(option) is operational.
7.
display
(See page 23.)
Displayed when the key lock is set.
8.
display
(See page 42 and
49.)
Displayed if the schedule timer or
OFF timer is enabled.
9. Under Centralized control " "
Displayed if the system is under the
management of central control equipment
(optional accessories) and the operation of
the system through the remote controller is
prohibited.
10. Changeover under control "
"
(VRV only)
Displayed on the remote controller if the
remote controller has no cooling/heating
selection eligibility mode
(see page 21)
.
