6 Installation
Installation and operation manual
11
EHY32AA
Daikin Altherma hybrid monobloc – Gas boiler module
4P538953-1 – 2018.06
Accessories Part number
Description
EKFGW4004
Extension P BM-Air 80×2000
EKFGW4085
Elbow PP BM-Air 80 90°
EKFGW4086
Elbow PP BM-Air 80 45°
EKGFP1289
Elbow PP/GALV 60/100 50°
EKGFP1299
Kit horizontal low profile PP/
GLV 60/100 (UK only)
INFORMATION
For extra configuration options regarding the flue gas
system, visit
http://fluegas.daikin.eu/
.
INFORMATION
For the installation of the flue and air supply duct material,
see the manual included with the materials. Contact the
manufacturer of the relevant flue and air supply duct
materials for extensive technical information and specific
assembly instructions.
6
Installation
6.1
Opening the unit
6.1.1
To open the gas boiler
1
2
2
1
Open the display cover.
2
Unscrew both screws.
3
Tilt the front panel towards you and remove the front panel.
6.1.2
To open the switch box cover of the gas
boiler
1
Open the gas boiler, see
"6.1.1 To open the gas boiler" on
page 11
.
2
Pull the boiler controller unit forwards. The boiler controller will
tip downwards to provide access.
6.2
Installation space
6.2.1
Installation space requirements
Within 1 meter of the unit, there must be an earthed wall plug. The
unit can be placed between two kitchen cabinets, or inside a kitchen
cabinet. Make sure there is sufficient ventilation at the bottom and
the top of the unit. If the unit is installed inside a cabinet, 2 cm of free
space at both sides of the unit and ventilation openings of at least
50 cm² are required. Make sure to have enough space above the
unit. It must be possible to slightly tilt the top cover and perform
maintenance.
50 cm²
50 cm²
2 cm
2 cm
6.3
Mounting the gas boiler
6.3.1
To install the gas boiler
1
Lift the unit from the package.
