3
|
Operation
User reference guide
23
EHFZ03S18DJ3V
Daikin Altherma 3 R F
4P596825-1 – 2019.10
▪
You are using the following room temperature schedule:
-
08:00 preset value (
Comfort
) = 20°C
-
23:00 preset value (
Eco
) = 18°C
▪
At 14:00, you go away for 3 hours.
Then you can do the following:
1
Set the overrule period (
Temperature lock
) to 2
hours
.
2
Go to the room temperature home page (
Room
).
3
Press to select .
Result:
For the next 2 hours, the room will NOT be heated to the scheduled 20°C,
but to the preset value (
Eco
= 18°C). After 2 hours, the room will heat up again to
the scheduled 20°C.
Advantage:
You save energy because you do NOT heat the room unnecessary, and by the time
you come home the room is warm again.
3.4.6 Room thermostat control - Using the leaving water temperature home pages
INFORMATION
The leaving water is the water that is sent to the heat emitters. The desired leaving
water temperature is set by your installer in accordance with the heat emitter type.
Example:
A home screen is available for both temperature zones: the main zone and
the additional zone. You only have to adjust the leaving water temperature settings
in case of problems.
Typical leaving water temperature home pages
Main zone:
User profile =
Basic
User profile =
Detailed
15:20
35°C
LWT main
Desired temperature
Mon
15:20
35°C
17:30
Mon
Mon
Desired temperature
LWT main
Additional zone:
User profile =
Basic
User profile =
Detailed
15:20
45°C
Desired temperature
LWT add
Mon
15:20
45°C
17:30
Mon
Mon
LWT add
Desired temperature
To read out the desired leaving water temperature (main + additional)
Go to the leaving water temperature home page (
LWT main
or
LWT add
).
