background image

4

 | 

Operation

User reference guide

40

ETVH/9W(G) + ETBH/9W

Daikin Altherma 3 H HT F+W

4P586456-1 – 2019.07

INFORMATION

Price value ranging from 0.00~990 valuta/kWh (with 2 significant values).

To set the electricity price

1

Go to [7.5.1]/[7.5.2]/[7.5.3]: 

User settings

 > 

Electricity

price

 > 

High

/

Medium

/

Low

.

2

Select the correct electricity price.

3

Confirm the changes.

4

Repeat this for all three electricity prices.

INFORMATION

Price value ranging from 0.00~990 valuta/kWh (with 2 significant values).

INFORMATION

If no schedule is set, the 

Electricity price

 for 

High

 is taken into account.

To set the electricity price schedule timer

1

Go to [7.5.4]: 

User settings

 > 

Electricity price

 >

Schedule

.

2

Program the selection using the scheduling screen. You can set
the 

High

Medium

 and 

Low

 electricity prices according to your

electricity supplier.

3

Confirm the changes.

INFORMATION

The  values  correspond  with  the  electricity  price  values  for 

High

Medium

  and 

Low

previously  set.  If  no  schedule  is  set,  the  electricity  price  for 

High

  is  taken  into

account.

About energy prices in case of an incentive per kWh renewable energy

An incentive can be taken into account when setting the energy prices. Although
the  running  cost  can  increase,  the  total  operation  cost,  taking  into  account  the
reimbursement will be optimized.

NOTICE

Make  sure  to  modify  the  setting  of  the  energy  prices  at  the  end  of  the  incentive
period.

To set the gas price in case of an incentive per kWh renewable energy

Calculate the value for the gas price with the following formula:

Actual gas price+(Incentive/kWh×0.9)

For the procedure to set the gas price, see 

"To set the gas price" 

[

4

 39].

To set the electricity price in case of an incentive per kWh renewable energy

Calculate the value for the electricity price with following formula:

Actual electricity price+Incentive/kWh

Summary of Contents for Altherma 3 H HT F ETVH16S18DA6V

































































Reviews: