Daikin Altherma 3 GEO EGSAH10DA9W, Operation Manual

Page: 4 / 16

3 Operation
Operation manual
4
EGSAH/X06+10DA9W(G)
Daikin Altherma 3 GEO
4P569812-1 – 2019.02
Item Description
d Help button : Press to show a help text related to the current
page (if available).
e Right dial The LCD shows an arc on the right side of the
display when you can use the right dial.
▪ : Turn, then press the right dial. Change
a value or setting, shown at the right side of the
screen.
▪ : Turn the right dial. Navigate through
the possible values and settings.
▪ : Press the right dial. Confirm your
choice and go to the next menu item.
3.2 Possible screens: Overview
The most common screens are as follows:
+
–
a
b
c
c2 c1
a Home screen
b Main menu screen
c Lower level screens:
c1 : Setpoint screen
c2 : Detailed screen with values
3.2.1 Home screen
Press the button to go back to the home screen. You see an
overview of the unit configuration and the room and setpoint
temperatures. Only symbols applicable for your configuration are
visible on the home screen.
6
1.6
bar
26 Feb 2019
22:19
55
21
45
h
j
i1
i2
i3
18
b
c
e3
e2
f1
e1
g2 g3 g4 f2 g1
a2 a1
d
Possible actions on this screen
Go through the list of the main menu.
Go to the main menu screen.
Enable/disable breadcrumbs.
Item Description
a Domestic hot water
a1 Domestic hot water
a2
55
Measured tank temperature
(1)
b Current date and time
c Disinfection / Powerful
Disinfection mode active
Powerful operation mode active
d Space operation mode
Cooling
Heating
e Outdoor / quiet mode
e1
6
Measured outdoor temperature
(1)
e2 Quiet mode active
e3 Outdoor brine piping
f Indoor unit / domestic hot water tank
f1 Floor-standing indoor unit with integrated tank
f2 Water pressure
g Main zone
g1 Installed room thermostat type:
Unit operation is decided based on the ambient
temperature of the dedicated Human Comfort
Interface (BRC1HHDA used as room thermostat).
Unit operation is decided by the external room
thermostat (wired or wireless).
— No room thermostat installed or set. Unit operation
is decided based on the leaving water temperature
regardless of the actual room temperature and/or
heating demand of the room.
g2 Installed heat emitter type:
Underfloor heating
Fancoil unit
Radiator
g3
21
Measured room temperature
(1)
g4
45
Leaving water temperature setpoint
(1)
h Holiday mode
Holiday mode active
i Additional zone
i1 Installed room thermostat type:
Unit operation is decided by the external room
thermostat (wired or wireless).
— No room thermostat installed or set. Unit operation
is decided based on the leaving water temperature
regardless of the actual room temperature and/or
heating demand of the room.
i2 Installed heat emitter type:
Underfloor heating
Fancoil unit
Radiator
i3
18
Leaving water temperature setpoint
(1)