SVLC-212-175
11
4. Operation
● The function of switch
Switch
Function
SET
If it continues pushing 3 seconds or more, it will change to setting mode.
In setting mode, it is used for the determination of a set point.
RESET/SHIFT
Various kinds of alarms are reset. The maximum value and the minimum value are reset in the maximum
minimum measurement display. In setting mode, it uses it as a switch to which it moves (move up)
a setting item.
MODE
In setting mode, it is used for the change of a setting item.
MAX/MIN
The usual measurement display and maximum value or minimum value display are changed.
In setting mode, it uses it as a switch to which it moves (move down) a setting item.
＋ ， －
The measurement display factor of the main monitor is changed.
In setting mode, it is used for change of a set point.
DISPLAY
A line (phase) display of voltage is changed. It is used in case it terminates setting mode.
And, it is used in case it returns the display combination of a measurement factor.
● Convenient functions
(1)
In case a measurement change or a line (phase) change is performed and the original screen composition
is not clear anymore, DISPLAY is pushed for more than 3 seconds or it's no-operation for 10 minutes and returns
to original screen structure.
(2)
If a measurement change is performed and the original main monitor display is not clear anymore.
It continues pushing a ＋ or － more than 3 seconds, or returns to the original measurement display
factor by no operation for 10 minutes.
(3)
Even if it stops operation with setting mode, it returns to the display mode in 10 minutes.
● 7 segment displays
This product shows the guidance in various setting using 7 segment displays besides a display of a measurement
value. A digital readout and 7 segment displays corresponding to each alphabet are shown in the following.
A
B(b)
C
D(d)
E
F
G
H
I
J
K
L
M
Non-dis
play
Non-dis
play
N(n)
O(o)
P
Q(q)
R(r)
S
T(t)
U(u)
V
W
X
Y(y)
Z
Non-dis
play
0
1
2
3
4
5
6
7
8
9
