Daihen OTC ARXIS pulse P403L, Owner'S Manual

Page: 104 / 188

S
ETTING
I
NTERNAL
F
UNCTIONS
W
ELDING
C
ONDITION
C
HAPTER
6
102
6.7 Setting Internal Functions
This section explains how to set the internal functions with the details.
The internal functions can be customized according to the using environment of the customer for further convenient use
of the welding power source.
6.7.1 Setting procedure
This section explains how to set the internal functions.
Details of internal function (
6.7.2
-
Detailed information on internal functions)
T I P S
• The internal function is activated at the point when the setting value is changed. To change
the set values of internal functions, ensure that there is no mistake in the function No. as
well as in the function setting.
■ Basic configuration of FUNCTION screen
No. Name Explanation
1 Function title Displays the No. and name of the selected function.
2 Function details Displays the function and advanced settings of the selected function.
3 Current setting The current setting is displayed.
4 Change settings area
Select the item with the blue cursor and change the setting. The item being set is marked with a
check mark.
(The displayed items vary with the function selected.)
5 BACK key The screen returns to the previous one.
Off
2023 05 10 15:50
ᤱ
5
4
3
2
1