Daihatsu slide control
Start up settings
Alarm switch
OFF
Close speed
1
Cushion
3
Open speed
4
TSTR
1
Braking
0
2X Dip/Sw
UP
HO%
2
Torque
4
Open timer
9
8 X Dip/Sw:
1
2
3
4
5
6
7
8
UP
DOWN
DOWN
DOWN
DOWN
UP unless electric lock fitted, then DOWN
DOWN
DOWN
These settings must be performed
before initial power
up.
For initial commissioning remove activation plug (3 pin; pink, blue & white).
Unit can be cycled using Test button on panel. Unit should drive closed on
power up, and then it will require a signal to open. First open run should be at
approximately 70% of full speed. Control will assess door weight and set the
check points accordingly.
Should any settings require altering, the unit should be powered down; the
settings adjusted and reapply power. A new set up run will be initiated to
assess the new settings.
Sensors &c will require setting up, especially the ultrasonic safety sensors.
