DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, Ultra Low Temperature Smart Freezer
34/79
<Fig.3.3.18> Export Completed
<Fig.3.3.19> If there is not chamber, not export
<Fig.3.3.20> When writing files to overwrite, confirmation message
-
Push the button “Export” then the folder(s) and file(s) thereof are created in the USB
wherein the inputted information will be stored. At least one ‘Chamber’ must be created by
the device to enable the export of information.
-
When the file(s) are already created in the USB by previous export, then the existing file(s)
will be removed by pushing the button “Export” that initiates the overwriting execution of
current information. Be sure to back up previous information before doing every “Export”.
-
The folder created in the USB by the “Export” will have the pathname comprising the ‘Model
name’, ‘Capacity’, and ‘Serial number’.
(
“
/udisk/smartlab/Device Type and Capacity(Serial number)/storage
”
)
Ex) In case of the Model name of DuoFreez U400 with Serial Number 12345678DFU400,
then the pathname would be “/udisk/smartlab/DF-U400(12345678DFU300)/storage”.
-
The file name to be created will contain the numbers of each ‘Chamber’ (“chamber
number.xls”)
Ex) In the case where 2 ‘Chambers’ were created then the file name would be as follows:
“/udisk/smartlab/DF-U400(12345678DFU400)/storage/chamber1.xls”
“/udisk/smartlab/DF-U400(12345678DFU400)/storage/chamber2.xls”
