DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, Digital Hotplates & Stirrers
8/44
2. Installation
2.1 Product Installation
* Caution of Installation
1. Please do not lay the product on the floor or subject it to shock. It can cause damage inside the
product.
2. Please install the product in a hard, flat, and stable place.
3. Please do not install the product in a place where it is exposed to direct sunlight, or in the
dangerous places.
4. Please do not install this product the place where there is high humidity or the risk of leakage.
5. This product was manufactured for normal operation at a rated voltage, so please check the
voltage status before installing the product.
6. When installing and using the product, please certainly use the power cord provided with the
products.
7. Please do not install this product in the environment that there is the possibility of flammable
gas leakage.
8. Please do not place the magnet or the tool which generates the magnetic field, nearby the
equipment. If this equipment is used at nearby position to the powerful source of
electromagnetic field, errors due to the magnetic field may be occurred.
9. Do not allow moisture, organic solvents, dust, or corrosive gases to enter the product.
10. Please be careful for burns because the residual heat may be remained even if this product is
operating or the power was disconnected.
11. Please do not install this product around the product having strong magnetic force.
12. Please do not use this product in conjunction with a metal container.
* Installation Process
1. Check the unit for any transport damages. If any such damages are found, please contact the
deliverer of the product.
2. The product should be positioned in a location where it has enough space for ventilation and
prevention from fire. The recommended distance of each side is minimum 20cm from the back
wall, 100cm from the side walls and ceiling respectively.
3. Place the device on a level, horizontal surface to support the capacity of the device without
vibration.
4. Connect the power cord to the wall socket.
5. When installing the device, insure the wall socket is easily accessible.
6. Do not earth to gas pipe, plastic tap water pipe or phone line. It may cause an electrical shock,
a fire, breakdown or explosion of the unit.
* Safety Symbols on a product
-
Safety symbols stickers Attached to side of product. For meaning of each symbol, please refer
to Precautions Before Use, Safety Instructions.
Safety symbols on units, for further
description of each symbol, please refer
to 3.1 Precautions for Use
.
2
