DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, Digital Hotplates & Stirrers
19/44
HEATING
150.5
℃
STIRRING
80 RPM
POWER
Set Temp.
Present RPM
Indicate Operation
Indicate Power
-
clockwise or counter-clockwise. The Start/Stop of the operation is performed by the Push
button of Jog-Dial Knob.
-
The range of the setting timer is 00:00~99:59, and it is adjusted at one minute unit. If setting
the timer to "00:00", the setting values that is operating is continuously operated.
-
TIMER LED blinks if the timer is operating or it is completed, and displays the standby state
during the operation of the timer. Heating and Stirring that are operating are stopped while
occurring the beep if the operation is completed.
-
If the PUSH button of Jog Dial Knob is pressed and held for 2-3 seconds, the setting value is
saved and this saved value is maintained even when the power is turned on again.
④
MODE - Locking Mode
-
If pressing once the MODE button in the Set Timer Mode, it is switched to the Safety Lock
Mode.
-
In the Locking Mode, the Turning by the Jog-Dial Knob or Push button do not applied, and LCD
Display and LED lamp indicate the status that is currently operating.
-
If pressing once the MODE button, it is entered into the Set Stirring Mode.
* ERROR Message
-
If Error situations are occurred, the Error warning is displayed on the idle screen.
ERROR
Message
Cause
Remedy
Error 1
Informs the time to be displayed the
temperature of abnormal value due to
the abnormality of Temperature Sensor.
Please check the temperature of
the heated top plate.
Error 2
Informs the abnormality of the stirring
operation.
Please check the appropriate
range.
<Table 3.3.1> Error Message
< Fig 3.3.5> Locking Mode
HEATING STIRRING TIMER
Indicate Operate Status
