background image

 

 

1.2  FCC Information 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions: 

 

This device may not cause harmful interference; 

 

This device must accept any interference received, including interference that may cause 
undesired operation. 

FCC compliance

 

This equipment has been tested and found to comply with the limits for a digital device, pursuant to 
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference. This equipment generates uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause harmful interference to radio 
communication. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

1.3  Legal Notices 

Copyright 

This user guide is ©2016, Dahua Technology Company, LTD. 

This user guide is the intellectual property of Dahua Technology Company, LTD and is protected by 
copyright. All rights reserved. 

Trademarks 

All hardware and software product names used in this document are likely to be registered 
trademarks and must be treated accordingly. 

1.4  Disclaimer  

 

This user guide has been compiled with great care and the information it contains has been 
thoroughly reviewed and verified. The text was complete and correct at the time of printing. This 
guide may be periodically updated to reflect changes to the product or to correct previous 
information and the content of this guide can change without notice. If you encounter an error or 
have any questions regarding the contents of this guide, contact customer service for the latest 
documentation and supplementary information. Dahua accepts no liability for damage resulting 
directly or indirectly from faults, incompleteness, or discrepancies between this guide and the 
product described. Dahua is not liable for any loss caused by installation, operation, or 
maintenance inconsistent with the information in this guide. 

 

Video loss is inherent to all digital surveillance and recording devices; therefore Dahua cannot be 
held liable for any damage that results from missing video information. To minimize the 
occurrence of lost digital information, Dahua recommends multiple, redundant recording systems, 
and adoption of backup procedure for all data. 

 

Contact the supplier or customer service if you encounter any issue while using this unit.  

Summary of Contents for X21A1E













Reviews: