Operation Manual
●
Carefully follow the instructions in the manual when performing any device disassembly
operations; Otherwise, it may cause water leakage or poor image quality due to
unprofessional disassembly. Please contact after-sales service to replace the desiccant if
there is condensation mist on the lens after taking the product out of the box or if the
desiccant turns green. (Not all models include desiccant.)
●
It is recommended to use the device together with a lightning rod, to enhance the lightning
protection effect.
●
It is recommended to ground the device to improve reliability.
●
Do not touch the image sensor (CMOS) directly. Dust and dirt can be removed with an air
blower, or you can wipe the lens gently with a soft cloth moistened with alcohol.
●
You can clean the casing of the device with a soft, dry cloth, and for tougher stains, use
the cloth with a mild detergent. To avoid possible damage to the coating of the device
casing which could cause a decrease in performance, do not use volatile solvents such as
alcohol, benzene, white spirit, etc. to clean the device casing, nor can you use a strong
abrasive detergent .
●
The domed cover is an optical component. Do not touch or clean the cover with your
hands directly during installation or operation. To remove dust, grease, or fingerprints,
wipe gently with diethyl-moistened oil-free cotton or a soft, damp cloth. You can also
remove dust with an air blower.
CAVEAT
●
Strengthen the protection of network, device data, and personal information by taking
measures including, but not limited to, using strong passwords, changing passwords
regularly, updating firmware to the latest version, and isolating of the computer network.
For some devices with old firmware versions, the ONVIF password will not be changed
automatically along with system password change, and you need to update the firmware
or manually update the ONVIF password.
●
Please use components or accessories supplied by the manufacturer, and make sure that
professional engineers perform the installation and maintenance of the device.
●
The image sensor surface must not be exposed to laser beam radiation in an
environment where a laser beam device is used.
●
Do not provide two or more power sources for the device unless otherwise specified.
Failure to follow these instructions could damage the device.
IV.
