Configuration
11
5.3.2 Configuring VTO Number
The VTO number can be used to differentiate each VTO, and it is normally configured
according to building number.
You can change the number of a VTO when it is not working as SIP server.
The VTO number can contain 5 numbers at most, and it cannot be the same as any room
number.
Log in to the web interface of the VTO, and then the main interface is displayed. See
Step 1
Main interface
Figure 5-3
Select
Local Setting > Basic
.
Step 2
The
Device Properties
interface is displayed. See Figure 5-4.
Device properties
Figure 5-4
In the
VTO No.
input box, enter the VTO number you planned for this VTO, and then
Step 3
click
Confirm
to save.
5.3.3 Configuring Network Parameters
Select
Network Setting > Basic
.
Step 1
The TCP/IP information is displayed. See Figure 5-5.
