17
6
User Registration
Only users whose information, including username, personnel number, room number,
fingerprint, and card number, is registered can unlock doors.
Press "*project password#" on the door station (VTO) to go to the
Engineering Setting
Step 1
interface.
On the
Engineering Setting
interface, select
User Registration
.
Step 2
Select
Add
.
Step 3
Enter user ID and Room No.
Step 4
Press # to save the settings.
Step 5
User registration
Figure 6-1
Record face images and issue cards.
Step 6
Face entry: Make sure that your face is in the middle of the frame. User face images will be
automatically taken. If you are not satisfied, tap
Cancel
to take a new image.
(Only for VTO
6541H) Fingerprint: at most three fingerprints of one user can be recorded.
Each fingerprint needs to be recorded three times. Operate according to voice prompt.
Issue card: You can issue at most five cards for each user. Swipe cards on the card issuing
interface, card numbers will automatically be recognized.
Issue cards through authorized cards.
Before issuing cards, you need to have an authorized card. If there are no
authorized cards, you need to issue a card on the door station (VTO) through
password.
On the web interface of the door station, select
Household Setting > Room No.
Management >
, and then you can set a card as an authorized card.
Issue cards through password.
You need to enter
Issue Card Password
on the web interface of the door station (VTO)
in
Local Setting > Access Control > Local
.
