15
3.2 General Config
If you first use VTO, you may need to operate according to the following steps:
Step 1. In Internet Explorer, input IP address of the VTO, and press Enter.
Note:
Default IP address of VTO is 192.168.1.110. Default username and password is
admin/admin. After first login, please change your password.
Step 2. In WEB interface, select System Config>Local Config, set video format as
WVGA as in Figure 3- 2.
Figure 3- 2
Step 3. In System Time tab, click on Sync PC to make VTO time the same with PC.
Step 4. Select System Config>Network Config, set VTO IP, Subnet Mask and Default
Gateway. See Figure 3- 3.
Figure 3- 3
Summary of Contents for VTO2000A-2
Page 1: ...i 2 Wire VTO2000A 2 User s Manual V1 0 0...
Page 4: ...iii Appendix 2 3 Embedded Box 30...
Page 12: ...7 Figure 2 2...
Page 15: ...10 Figure 2 5 Figure 2 6...
