Dahua VTH5221 series, User Manual, Page: 31 / 105

Device Debugging 25
Figure 5-9
Click
“Add”.
Step 3
The system displays
“Add” interface, as shown in Figure 5-10.
Figure 5-10
Set VTO parameters by reference to Table 5-3. Step 4
Parameter Description
Rec No. VTO number.
Register Password Signaling interactive use in SIP system. Adopt default value.
IP Address IP address of VTO.
Username
Username and password to login WEB interface of this VTO.
Password
Table 5-3
Click
“OK” to complete adding.
Step 5
Repeat these steps to add other outdoor stations in the group.
5.1.1.7 Add VTH
Add info about all indoor stations (VTH).

It is necessary to add VTH only when this VTO works as SIP server.
 When there are master VTH and extension, both shall be added.
Select
“Household Setting > Room No. Management”.
Step 1