6
2
Installation
Do not install the Terminal in places with condensation, high temperature, grease, dust,
chemical corrosion, or direct sunlight.
In case of abnormality after powering on, cut off the power supply immediately, and then
pull out the network cable. Power on again after troubleshooting.
Engineering installation and debugging shall be done by professional teams. Do not
dismantle or repair arbitrarily in case of device failure. Contact after-sales department.
Surface mount is supported, and rear cable outlet and bottom cable outlet are reserved on the
mounting plate.
Screws
Before installing the Terminal, check the screws in the accessory package.
Table 2-1 Screws
Name
Figure
Quantity
M3X8 hexalobular socket screw
4
ST3×18 self-tapping screw
4
Expansion bolt
4
Mounting Plate Dimensions
Before installing the Terminal, see the mounting plate dimensions first to provide enough
installation space.
