Battery Installation 2
2
Battery Installation
CAUTION
Put batteries into the battery holder correctly according to their anodes and cathodes.
Use two new AAA alkaline dry batteries.
Take the batteries out of the Controller in case of battery leakages if the Controller is not
used for a long period.
Do not use new batteries and old ones at the same time, and do not use batteries with
different modes at the same time.
Properly dispose the batteries that you replaced.
Pull the battery cover off the Controller.
Step 1
Put two new AAA alkaline dry batteries (not provided) into the battery holder, and make
Step 2
sure the "+" side of the battery touches the "+" terminal.
After correctly inserting the battery, close the battery cover.
Step 3
