8
84mm
～
108mm,
φ
80mm
～
130mm,
φ
130mm
～
152mm,
φ
155mm
～
178mm,
φ
180mm
～
203mm,
φ
194mm
～
216mm; It is optional according to the
users’ requirements; the special size is
customizable as well.
Figure 3-8
Step 1
Fix the installation hold hoop and the pole-mount bracket on the pole and paste glass cement to
make it sealed and waterproof, as it is shown in Figure 3-8 (1).
Note:
Check if the hold hoop is tightened properly after installation, which is to avoid hoop breakage
due to improper installation.
Step 2
Refer to the step 2 to 4 in
“3.1 Wall Mount Installation” and install the thermal hybrid dome on the
bracket.
Step 3
Check if the thermal hybrid dome is installed firmly and complete the installation of the unit
device, as it is shown in Figure 3-8 (2).
